This chapter sets out for the standardised approach to credit risk the conditions to recognise an external credit assessment institution and related implementation considerations.
In jurisdictions that allow the use of external ratings for regulatory purposes, only credit assessments from credit rating agencies recognised as external credit assessment institutions (ECAIs) will be allowed. National supervisors are responsible for determining on a continuous basis whether an ECAI meets the criteria listed in CRE21.2 and recognition should only be provided in respect of ECAI ratings for types of exposure where all criteria and conditions are met. National supervisors should also take into account the criteria and conditions provided in the International Organization of Securities Commissions' Code of Conduct Fundamentals for Credit Rating Agencies1 when determining ECAI eligibility. The supervisory process for recognising ECAIs should be made public to avoid unnecessary barriers to entry.
| 1 | Available at www.iosco.org/library/pubdocs/pdf/IOSCOPD482.pdf . |
An ECAI must satisfy each of the following eight criteria.
Regarding the disclosure of conflicts of interest referenced in CRE21.2(4) above, at a minimum, the following situations and their influence on the ECAI’s credit rating methodologies or credit rating actions shall be disclosed:
Regarding the disclosure of an ECAI's compensation arrangements referenced in CRE21.2(4) above:
Supervisors will be responsible for assigning eligible ECAIs’ ratings to the risk weights available under the standardised risk weighting framework, ie deciding which rating categories correspond to which risk weights. The mapping process should be objective and should result in a risk weight assignment consistent with that of the level of credit risk reflected in the tables above. It should cover the full spectrum of risk weights.
When conducting such a mapping process, factors that supervisors should assess include, among others, the size and scope of the pool of issuers that each ECAI covers, the range and meaning of the ratings that it assigns, and the definition of default used by the ECAI.
In order to promote a more consistent mapping of ratings into the available risk weights and help supervisors in conducting such a process, Standardised approach - implementing the mapping process (April 2019) provides guidance as to how such a mapping process may be conducted.
Banks must use the chosen ECAIs and their ratings consistently for all types of exposure where they have been recognised by their supervisor as an eligible ECAI, for both risk-weighting and risk management purposes. Banks are not allowed to “cherry-pick” the ratings provided by different ECAIs and to arbitrarily change the use of ECAIs.
If there is only one rating by an ECAI chosen by a bank for a particular exposure, that rating should be used to determine the risk weight of the exposure.
If there are two ratings by ECAIs chosen by a bank that map into different risk weights, the higher risk weight will be applied.
If there are three or more ratings with different risk weights, the two ratings that correspond to the lowest risk weights should be referred to. If these give rise to the same risk weight, that risk weight should be applied. If different, the higher risk weight should be applied.
Where a bank invests in a particular issue that has an issue-specific rating, the risk weight of the exposure will be based on this rating. Where the bank’s exposure is not an investment in a specific rated issue, the following general principles apply.
Whether the bank intends to rely on an issuer- or an issue-specific rating, the rating must take into account and reflect the entire amount of credit risk exposure the bank has with regard to all payments owed to it. For example, if a bank is owed both principal and interest, the rating must fully take into account and reflect the credit risk associated with repayment of both principal and interest.
In order to avoid any double-counting of credit enhancement factors, no supervisory recognition of credit risk mitigation techniques will be taken into account if the credit enhancement is already reflected in the issue specific rating (see CRE22.5).
Where exposures are risk-weighted based on the rating of an equivalent exposure to that borrower, the general rule is that foreign currency ratings would be used for exposures in foreign currency. Domestic currency ratings, if separate, would only be used to risk-weight exposures denominated in the domestic currency.2
| 2 | However, when an exposure arises through a bank’s participation in a loan that has been extended, or has been guaranteed against convertibility and transfer risk, by certain multilateral development banks (MDBs), its convertibility and transfer risk can be considered by national supervisors to be effectively mitigated. To qualify, MDBs must have preferred creditor status recognised in the market and be included in the first footnote to CRE20.14. In such cases, for risk-weighting purposes, the borrower’s domestic currency rating may be used instead of its foreign currency rating. In the case of a guarantee against convertibility and transfer risk, the local currency rating can be used only for the portion that has been guaranteed. The portion of the loan not benefiting from such a guarantee will be risk-weighted based on the foreign currency rating. |
For risk-weighting purposes, short-term ratings are deemed to be issue-specific. They can only be used to derive risk weights for exposures arising from the rated facility. They cannot be generalised to other short-term exposures, except under the conditions of CRE21.18. In no event can a short-term rating be used to support a risk weight for an unrated long-term exposure. Short-term ratings may only be used for short-term exposures against banks and corporates. The table3 4 below provides a framework for banks’ exposures to specific short-term facilities, such as a particular issuance of commercial paper:
| Risk weight table for specific short-term ratings | Table 15 | |||
| External rating | A-1/P-1 | A-2/P-2 | A-3/P-3 | Others |
| Risk weight | 20% | 50% | 100% | 150% |
If a short-term rated facility attracts a 50% risk-weight, unrated short-term exposures cannot attract a risk weight lower than 100%. If an issuer has a short-term facility with an external rating that warrants a risk weight of 150%, all unrated exposures, whether long-term or short-term, should also receive a 150% risk weight, unless the bank uses recognised credit risk mitigation techniques for such exposures.
In cases where short-term ratings are available, the following interaction with the general preferential treatment for short-term exposures to banks as described in CRE20.19 will apply:
When a short-term rating is to be used, the institution making the assessment needs to meet all of the eligibility criteria for recognising ECAIs, as described in CRE21.2, in terms of its short-term ratings.
External ratings for one entity within a corporate group cannot be used to risk-weight other entities within the same group.
As a general rule, banks should use solicited ratings from eligible ECAIs. National supervisors may allow banks to use unsolicited ratings in the same way as solicited ratings if they are satisfied that the credit assessments of unsolicited ratings are not inferior in quality to the general quality of solicited ratings.
This standard describes the scope of application of the Basel Framework.
This standard describes the criteria that bank capital instruments must meet to be eligible to satisfy the Basel capital requirements, as well as necessary regulatory adjustments and transitional arrangements.
This standard describes the framework for risk-based capital requirements.
This standard describes how to calculate capital requirements for credit risk.
This standard describes how to calculate capital requirements for market risk and credit valuation adjustment risk.
This standard describes how to calculate capital requirements for operational risk.
This standard describes the simple, transparent, non-risk-based leverage ratio. This measure intends to restrict the build-up of leverage in the banking sector and reinforce the risk-based requirements with a simple, non-risk-based "backstop" measure.
This standard describes the Liquidity Coverage Ratio, a measure which promotes the short-term resilience of a bank's liquidity risk profile.
The net stable funding ratio requires banks to maintain a stable funding profile in relation to the composition of their assets and off-balance-sheet activities.
Large exposures regulation limits the maximum loss that a bank could face in the event of a sudden counterparty failure to a level that does not endanger the bank's solvency. This standard requires banks to measure their exposures to a single counterparty or a group of connected counterparties and limit the size of large exposures in relation to their capital.
This standard establishes minimum standards for margin requirements for non-centrally cleared derivatives. Such requirements reduce systemic risk with respect to non-standardised derivatives by reducing contagion and spillover risks and promoting central clearing.
The Pillar 2 supervisory review process ensures that banks have adequate capital and liquidity to support all the risks in their business, especially with respect to risks not fully captured by the Pillar 1 process, and encourages good risk management.
This standard sets out disclosure requirements, which aim to encourage market discipline.
The Basel Core Principles provide a comprehensive standard for establishing a sound foundation for the regulation, supervision, governance and risk management of the banking sector.