Introduction

Banks can choose between two broad methodologies for calculating their risk-based capital requirements for credit risk. The first is the standardised approach, which is set out in chapters CRE20 to CRE22:

The second risk-weighted capital treatment for measuring credit risk, the internal ratings-based (IRB) approach, allows banks to use their internal rating systems for credit risk, subject to the explicit approval of the bank’s supervisor. The IRB approach is set out in chapters CRE30 to CRE36.

The treatment of the following exposures is addressed in separate chapters of the credit risk standard:

Claims on sovereigns

Claims on sovereigns and their central banks will be risk weighted as follows:

At national discretion, a lower risk weight may be applied to banks’ exposures to their sovereign (or central bank) of incorporation denominated in domestic currency and funded2 in that currency.3 Where this discretion is exercised, other national supervisory authorities may also permit their banks to apply the same risk weight to domestic currency exposures to this sovereign (or central bank) funded in that currency.

For the purpose of risk weighting claims on sovereigns, supervisors may recognise the country risk scores assigned by Export Credit Agencies (ECAs). To qualify, an ECA must publish its risk scores and subscribe to the Organisation for Economic Cooperation and Development’s (OECD) agreed methodology. Banks may choose to use the risk scores published by individual ECAs that are recognised by their supervisor, or the consensus risk scores of ECAs participating in the “Arrangement on Officially Supported Export Credits”.4 The OECD agreed methodology establishes eight risk score categories associated with minimum export insurance premiums. These ECA risk scores will correspond to risk weight categories as detailed below.

Claims on the Bank for International Settlements, the International Monetary Fund, the European Central Bank, the European Union, the European Stability Mechanism and the European Financial Stability Facility may receive a 0% risk weight.

Claims on non-central government public sector entities (PSEs)

Claims on domestic PSEs will be risk-weighted at national discretion, according to either option 1 or option 2 for claims on banks (see CRE20.14).5 When option 2 is selected, it is to be applied without the use of the preferential treatment for short-term claims.

Subject to national discretion, claims on certain domestic PSEs may also be treated as claims on the sovereigns in whose jurisdictions the PSEs are established.6 Where this discretion is exercised, other national supervisors may allow their banks to risk weight claims on such PSEs in the same manner.

Claims on multilateral development banks (MDBs)

The risk weights applied to claims on MDBs will generally be based on external credit assessments as set out under option 2 for claims on banks but without the possibility of using the preferential treatment for short-term claims. A 0% risk weight will be applied to claims on highly rated MDBs that fulfil to the Committee’s satisfaction the criteria provided below.7 The Committee will continue to evaluate eligibility on a case-by-case basis. The eligibility criteria for MDBs risk weighted at 0% are:

Claims on banks

There are two options for claims on banks. National supervisors will apply one option to all banks in their jurisdiction. No claim on an unrated bank, except for self-liquidating letters of credit, may receive a risk weight lower than that applied to claims on its sovereign of incorporation.

Under the first option, all banks incorporated in a given country will be assigned a risk weight one category less favourable than that assigned to claims on the sovereign of that country. However, for claims on banks in countries with sovereigns rated BB+ to B- and on banks in unrated countries the risk weight will be capped at 100%.

The second option bases the risk weighting on the external credit assessment of the bank itself with claims on unrated banks being risk-weighted at 50%. Under this option, a preferential risk weight that is one category more favourable may be applied to claims with an original maturity8 of three months or less, subject to a floor of 20%. This treatment will be available to both rated and unrated banks, but not to banks risk weighted at 150%.

The two options are summarised in the tables below.9

When the national supervisor has chosen to apply the preferential treatment for claims on the sovereign as described in CRE20.5, it can also assign, under both options 1 and 2, a risk weight that is one category less favourable than that assigned to claims on the sovereign, subject to a floor of 20%, to claims on banks of an original maturity of 3 months or less denominated and funded in the domestic currency.

Claims on securities firms

Claims on securities firms may be treated as claims on banks provided these firms are subject to supervisory and regulatory arrangements comparable to those under this Framework (including, in particular, risk-based capital requirements).10 Otherwise such claims would follow the rules for claims on corporates.

Claims on corporates

The table provided below illustrates the risk weighting of rated corporate claims, including claims on insurance companies. The standard risk weight for unrated claims on corporates will be 100%. No claim on an unrated corporate may be given a risk weight preferential to that assigned to its sovereign of incorporation.

Supervisory authorities should increase the standard risk weight for unrated claims where they judge that a higher risk weight is warranted by the overall default experience in their jurisdiction. As part of the supervisory review process, supervisors may also consider whether the credit quality of corporate claims held by individual banks should warrant a standard risk weight higher than 100%.

At national discretion, supervisory authorities may permit banks to risk weight all corporate claims at 100% without regard to external ratings. Where this discretion is exercised by the supervisor, it must ensure that banks apply a single consistent approach, ie either to use ratings wherever available or not at all. To prevent “cherry-picking” of external ratings, banks should obtain supervisory approval before utilising this option to risk weight all corporate claims at 100%.

Claims included in the regulatory retail portfolios

Claims that qualify under the criteria listed in CRE20.21 may be considered as retail claims for regulatory capital purposes and included in a regulatory retail portfolio. Exposures included in such a portfolio may be risk-weighted at 75%, except as provided in CRE20.26 for past due loans.

To be included in the regulatory retail portfolio, claims must meet the following four criteria:

National supervisory authorities should evaluate whether the risk weights in CRE20.20 are considered to be too low based on the default experience for these types of exposures in their jurisdictions. Supervisors, therefore, may require banks to increase these risk weights as appropriate.

Claims secured by residential property

Lending fully secured by mortgages on residential property that is or will be occupied by the borrower, or that is rented, will be risk weighted at 35%. In applying the 35% weight, the supervisory authorities should satisfy themselves, according to their national arrangements for the provision of housing finance, that this concessionary weight is applied restrictively for residential purposes and in accordance with strict prudential criteria, such as the existence of substantial margin of additional security over the amount of the loan based on strict valuation rules. Supervisors should increase the standard risk weight where they judge the criteria are not met.

National supervisory authorities should evaluate whether the risk weights in CRE20.23 are considered to be too low based on the default experience for these types of exposures in their jurisdictions. Supervisors, therefore, may require banks to increase these risk weights as appropriate.

Claims secured by commercial real estate

In view of the experience in numerous countries that commercial property lending has been a recurring cause of troubled assets in the banking industry over the past few decades, the Committee holds to the view that mortgages on commercial real estate do not, in principle, justify other than a 100% weighting of the loans secured.12

Past due loans

The unsecured portion of any loan (other than a qualifying residential mortgage loan) that is past due for more than 90 days, net of specific provisions (including partial write-offs), will be risk-weighted as follows: 13

For the purpose of defining the secured portion of the past due loan, eligible collateral and guarantees will be the same as for credit risk mitigation purposes (see chapter CRE22). Past due retail loans are to be excluded from the overall regulatory retail portfolio when assessing the granularity criterion specified in CRE20.21, for risk-weighting purposes.

In addition to the circumstances described in CRE20.26, where a past due loan is fully secured by those forms of collateral that are not recognised in CRE22.37 and CRE22.39, a 100% risk weight may apply when provisions reach 15% of the outstanding amount of the loan. These forms of collateral are not recognised elsewhere in the standardised approach. Supervisors should set strict operational criteria to ensure the quality of collateral.

In the case of qualifying residential mortgage loans, when such loans are past due for more than 90 days they will be risk weighted at 100%, net of specific provisions. If such loans are past due but specific provisions are no less than 20% of their outstanding amount, the risk weight applicable to the remainder of the loan can be reduced to 50% at national discretion.

Higher-risk categories

The following claims will be risk weighted at 150% or higher:

National supervisors may decide to apply a 150% or higher risk weight reflecting the higher risks associated with some other assets.

Other assets

The risk weight for investments in significant minority- or majority-owned and –controlled commercial entities is determined according to two materiality thresholds:

Investments in significant minority- or majority-owned and –controlled commercial entities below the materiality thresholds in CRE20.32 must be risk-weighted at 100%. Investments in excess of the materiality thresholds must be risk-weighted at 1250%.

A deduction treatment is specified in CAP30.32 for the following exposures: significant investments in the common shares of unconsolidated financial institutions, mortgage servicing rights, and deferred tax assets that arise from temporary differences. The exposures are deducted in the calculation of Common Equity Tier 1 (CET1) if they exceed the thresholds set out in CAP30.32 and CAP30.33. As specified in CAP30.34, the amount of the items that are not deducted in the calculation of CET1 will be risk weighted at 250%.

The standard risk weight for all other assets will be 100%.14 Investments in equity or regulatory capital instruments issued by banks or securities firms will be risk weighted at 100%, unless deducted from the capital base according CAP30.

Off-balance sheet items

Off-balance-sheet items under the standardised approach will be converted into credit exposure equivalents through the use of credit conversion factors (CCF). Counterparty risk weightings for over-the-counter (OTC) derivative transactions will not be subject to any specific ceiling.

Commitments with an original maturity up to one year and commitments with an original maturity over one year will receive a CCF of 20% and 50%, respectively. However, any commitments that are unconditionally cancellable at any time by the bank without prior notice, or that effectively provide for automatic cancellation due to deterioration in a borrower’s creditworthiness, will receive a 0% CCF.15

Direct credit substitutes, eg general guarantees of indebtedness (including standby letters of credit serving as financial guarantees for loans and securities) and acceptances (including endorsements with the character of acceptances) will receive a CCF of 100%.

Sale and repurchase agreements and asset sales with recourse,16 where the credit risk remains with the bank will receive a CCF of 100%.

A CCF of 100% will be applied to the lending of banks’ securities or the posting of securities as collateral by banks, including instances where these arise out of repo-style transactions (ie repurchase/reverse repurchase and securities lending/securities borrowing transactions). See CRE22.37 to CRE22.80 for the calculation of risk-weighted assets where the credit converted exposure is secured by eligible collateral. This paragraph does not apply to posted collateral that is treated under either the standardised approach to counterparty credit risk (CRE52) or the internal models method for counterparty credit risk (CRE53) calculation methods in the counterparty credit risk framework.

Forward asset purchases, forward forward deposits and partly-paid shares and securities17, which represent commitments with certain drawdown will receive a CCF of 100%.

Certain transaction-related contingent items (eg performance bonds, bid bonds, warranties and standby letters of credit related to particular transactions) will receive a CCF of 50%.

Note issuance facilities and revolving underwriting facilities will receive a CCF of 50%.

For short-term self-liquidating trade letters of credit arising from the movement of goods (eg documentary credits collateralised by the underlying shipment), a 20% CCF will be applied to both issuing and confirming banks.

Where there is an undertaking to provide a commitment on an off-balance sheet item, banks are to apply the lower of the two applicable CCFs.

Exposures that give rise to counterparty credit risk

For exposures that give rise to counterparty credit risk according to CRE51.4 (ie OTC derivatives, exchange-traded derivatives, long settlement transactions and securities financing transactions), the exposure amount to be used in the determination of RWA is to be calculated under the rules set out in CRE50 to CRE54.